The wheel seat of the shower room pulley should use compression-resistant and heavy-duty materials, such as 304 stainless steel and high-quality composition materials. The seal of the wheel seat is good, water vapor is not easy to enter the wheel, and the smoothness of the wheel is ensured. In addition, pay attention to the cooperation between the shower room pulley and the aluminum track. The shower room pulley and the track should cooperate closely, with small gaps, and not easy to fall when impacted by external forces to prevent accidents.
When using the shower room pulley, it is necessary to prevent the lower side from strongly resisting the movable door to avoid causing the movable door to fall. Put smoothing agent on the roller slide of the shower room regularly. Adjust in time to ensure the effective load and smooth sliding of the sliding door of the shower room pulley.
When the sliding door of the shower room does not work smoothly, check whether the shower room pulley is broken and the rails are deformed. Replace if there is any. Secondly, whether the pulleys of the shower room are tightened, the left and right sides of the door slide are parallel, and the sides are tightened and adjusted. Whether the movable door wheel and the glass are stuck with foreign objects.